-
Online Yedek Parça
- +90 212 576 26 96
- info@baysel.com.tr
-
Manford
MANFORD VF-700-1000 / CNC İŞLEME MERKEZİ
- Motor direct-coupled spindle rotates up to 12,000 rpm,with torque directly transmitted through the shaft coupling,which ensures low inertia but keeps high-efficient machining performance.
- Precision ceramic bearings of high rigidity and low thermal expansion are deployed to optimize bearing supports. Low run-out and low thermal deformations are thus obtained at the spindle nose.
- Z-axis servo brake eliminates the need for the typical heavy cast iron counter weight and chain assembly. The reduced mass and weight allow quick rapid traverse rates and better surface finishing on mold machining.
- Servomotor and ballscrews are directly coupled for backlash-free transmission to keep low inertia and high efficiency output, offering excellent dynamic precision during 3-axis simultaneous contour cutting.
- Heavy-duty roller bearing linear guideways with 45mm rail width has large contact surface between sliding roller block and rail.
- Full-support design optimizes rigidity of machine structure.
Travel
| X / Y / Z travel | 700/510/410 (27.5/20/16.1 Inch) mm |
|---|---|
| Spindle nose to table surface | 150~560 (5.9~22 Inch) mm |
Table
| Table size | 800x510 (31.4x20 Inch) mm |
|---|---|
| T slot | 18x5Tx100 mm |
| Max. table load | 500 Kgs |
Spindle
| Speed | 12,000 |
|---|---|
| Taper | BT40 |
| Transmission | Direct drive |
| Motor | 7.5/11 kw |
Feed Rate
| Rapid feed rate of XYZ | 36/36/36 M / min |
|---|---|
| Cutting feed rate | 1~12 M / min |
| 3 axis slide way | Roller type linear guide ways on 3 axes |
Axes Feed
| Linear guide ways | Roller type linear guide ways on 3 axes |
|---|
Other
| CNC control system | Fanuc/Mitsubishi |
|---|
Air & Power Supply
| Air source | 5~7 Kg / c㎡ |
|---|
Machine Dimension
| Dimension | 2,630x1,805x2,810 mm |
|---|---|
| Net weight | 5,800 kgs |
| Gross weight | 6,300 Kgs |
ATC
| Tool type | Armless type 16 tools |
|---|---|
| Max. tool length | 300 mm |
| Max. tool weight | 6 kgs |
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine. Specifications are subject to change without notice.
CNC İŞLEME MERKEZİ
